top of page

Beam Ankr and Accessories

The Beam Anker is a between flange, tension mounted bracket for mounting a wide range of loads on standard, wide flange beams and channel.  Use for mounting a wide range of industrial materials up to 106 lbs mounted vertically or horizontally. 
                                                                                         
Adjustable to fit between beam and channel flanges 8 to 12 “ wide, the mounting surface is pre-drilled and tapped for standard 3/8"-16 Bolts. 
                                  
Additional custom fabricated mounting plates and pre-cut strut kits are available for mounting  additional apparatus and fixtures. 
                                                The Beam Ankr is a new easy installation option for mounting lights, control units, pipe, ducting, junction boxes, emergency supply boxes, fire extinguishers etc.                               
                                  
Disclaimer – the Beam Ankr should NOT to be used for lifting of any type.

BEAM ANKR 8-12"

The Beam Anker is a between flange, tension mounted bracket for mounting a wide range of loads on standard, wide flange beams and channel. Use for mounting a wide range of industrial materials up to 106 lbs mounted vertically or horizontally.

Adjustable to fit between beam and channel flanges 8 to 12 “ wide, the mounting surface is pre-drilled and tapped for standard 3/8"-16 Bolts.

Additional custom fabricated mounting plates and pre-cut strut kits are available for mounting additional apparatus and fixtures.
The Beam Ankr is a new easy installation option for mounting lights, control units, pipe, ducting, junction boxes, emergency supply boxes, fire extinguishers etc.

Disclaimer – the Beam Ankr should NOT to be used for lifting of any type.

BEAM ANKR MAX 8-12" F

The Beam Ankr Adapter Bracket Kit is designed for those items that need to be offset further than the surface mount area allows.  

The Adapter Bracket can be installed in vertically or horizontally on the Beam Ankr and is provided with 8 hex bolts, spring washers and washers ready to install the apparatus onto the Beam Ankr.

ADAPTER BRACKET KIT- Offset, Two Orientation Options

The Beam Ankr Adapter Bracket Kit is designed for those items that need to be offset further than the surface mount area allows.

The Adapter Bracket can be installed in vertically or horizontally on the Beam Ankr and is provided with 8 hex bolts, spring washers and washers ready to install the apparatus onto the Beam Ankr.

place keeper

FLANGE BRACKET KIT - Flange Orientated Mounting Bracket Kit

place keeper

place keeper

POLE ADAPTER BRACKET KIT - Offset, Two Orientation Options

place keeper

12 gauge standard slotted channel  c/w 4 x 1" x 1 3/8" bolts and 4 x 1 3/8" washers.            
                                       
Strut dimensions are:                       
                                                     1 5/8" wide x 1 5/8" tall x 12 ga. thick                                                                                                            
                                        
Slotted for 1/2" rod and fasteners                                                   
                                             
Slots are sized for a 1/2" Threaded Rod or Fastener              
                                                                                                                
Finish is Unistrut Defender                                               
                                                                                                                                         
                                                This channel is commonly used for trapeze supports, seismic bracing, ceiling grids, pipe, conduit, duct and cable tray supports, racks, and other general framing.

UNISTRUT KIT
12" x 2 pc ~ 1-5/8" x 1-5/8", 12 Gauge Slotted Metal Framing Strut

12 gauge standard slotted channel c/w 4 x 1" x 1 3/8" bolts and 4 x 1 3/8" washers.

Strut dimensions are:
1 5/8" wide x 1 5/8" tall x 12 ga. thick

Slotted for 1/2" rod and fasteners

Slots are sized for a 1/2" Threaded Rod or Fastener

Finish is Unistrut Defender

This channel is commonly used for trapeze supports, seismic bracing, ceiling grids, pipe, conduit, duct and cable tray supports, racks, and other general framing.

12 gauge standard slotted channel  c/w 4 x 1" x 1 3/8" bolts and 4 x 1 3/8" washers.                  
                                       
Product dimensions are:                       
                                                     1 5/8" wide x 1 5/8" tall x 12 ga. thick                                                                                                            
                                        
Slotted for 1/2" rod and fasteners                                                   
                                             
Slots are sized for a 1/2" Threaded Rod or Fastener              
                                                                                                                
Finish is Unistrut Defender                                               
                                                         This channel is commonly used for trapeze supports, seismic bracing, ceiling grids, pipe, conduit, duct and cable tray supports, racks, and other general framing..

UNISTRUT KIT
12" x 4 pc ~ 1-5/8" x 1-5/8", 12 Gauge Slotted Metal Framing Strut

12 gauge standard slotted channel c/w 4 x 1" x 1 3/8" bolts and 4 x 1 3/8" washers.

Product dimensions are:
1 5/8" wide x 1 5/8" tall x 12 ga. thick

Slotted for 1/2" rod and fasteners

Slots are sized for a 1/2" Threaded Rod or Fastener

Finish is Unistrut Defender
This channel is commonly used for trapeze supports, seismic bracing, ceiling grids, pipe, conduit, duct and cable tray supports, racks, and other general framing..

bottom of page